CableEye wire harness testing systems easily link to custom test fixtures and harnesses and instantaneously check for faults, identify the type of faults, and pinpoint fault locations.

The Auto Test mode is where you go to perform the main tests cable tests, which requires you to have the remote unit plugged into the other end of the cable. At the end of the tests, you can save the ...

If the TS100 has a fault, it comes not from the iron itself but from its cable. A high-grade iron will have an extra-flexible PVC or silicone cable, but the TS100 does not have a cable of its own.

Cable testing usually is part of construction acceptance testing. Cable acceptance tests give you the "as-built" cable data. Unfortunately, few owners have the important "as-startup-tested" cable test ...

The street scene shows damage caused by an explosion in a manhole as a result of gases generated by a low-voltage arcing fault. North America, according to statistics published by the IEEE Insulated ...

A new hyper-scale data center was built in rural New Jersey that’s served by more than 100 25kV cables. Six months into operation, a cable termination failed catastrophically, and the forensic ...

When using accelerometers with long cables, you must be careful that the cables do not attenuate the signals at high frequencies. Engineers at PCB Piezotronics point out that such attenuation may ...