About 40,400 results
Open links in new tab
  1. Any better way to cover wood racks? - Hearth.com Forums

    Oct 29, 2022 · Next refill, I just remove the supports and then just set the roofing back on top of the pile when I and done and throw a couple of pallets on top. I use 3 to 4 cords a year and …

  2. Plugging small holes in cast iron stove? - Hearth.com Forums

    Dec 9, 2021 · Finally, I applied a generous layer of cement over the top and all around the bolt, using a gloved hand to produce a tidy smear around the hardware, wiping off any excess with …

  3. Insulating around flue at roof | Hearth.com Forums Home

    Jul 1, 2009 · I did design generous ventilation into this house as I have had to deal with ice damming in every house I've owned. Given how much roof deck you are heating, my guess is …

  4. Re-cementing wood stove joints | Hearth.com Forums Home

    Oct 5, 2006 · Scrape out all the old refactory cement and apply a very generous amount to the mating surfaces. then re essemble the two parts. With a putty knife and damp rag it is possible …

  5. Inserts: Buck vs Osburn vs Lopi? | Hearth.com Forums Home

    Dec 2, 2008 · I've narrowed down my search for a new fireplace insert to these locally available units. I'll be getting my chimney relined at the time of install: Buck Model 74 Osburn 1600 Lopi …

  6. Stainless cover vs full chimney cap over masonry crown

    Sep 20, 2021 · I tightened everything together in a very generous bed of silicone. Finally the rain cap slid over the top plate so that everything "shingled" properly. Realistically, this crown …

  7. Jotul F500 Rebuild- Actually not hard at all - Hearth.com Forums

    Nov 16, 2021 · I used 2.50 tubes of sealant for the rebuild and I thought I was being very generous with it. I also installed a damper in my stove pipe, should have done that a long time …

  8. stove bypass | Hearth.com Forums Home

    May 25, 2008 · Of the stove mfrs listed, I'd probably go with a Lopi/Avalon with a bypass. . .or maybe a VC 2n1, if they offered me a generous discount to try their relatively new stove. If you …

  9. Clearance reduction in an alcove | Hearth.com Forums Home

    Dec 3, 2015 · The stove requires generous clearance to the stove top - 58" or 8ft from floor to ceiling. A ventilated ceiling protector may work, but that is up to the local inspecting authority. …

  10. No luck with 3" Duravent pellet appliance adapter. How does it fit ...

    Jan 17, 2012 · Generous amounts of high temp black sealant did the trick. It is a solid connection with zero issues. I made the connection with the "T" already attached to the adapter and then …